"It's complicated"

[k|ngp|n]

http://overclockingpin.com/_TIN0287.jpg

http://overclockingpin.com/_TIN0288.jpg

[Chiller]

Nice one there, i have those PCiE raiser to and i was also using it to get vga higher on mobo and just put an Armaflex mat under vga over the PciE slots for isolation, eassy in use.
But didn't look yet for the 12v line in the PciE slot for extra power.

and sprayed the raiser with acrylic compound spray for pcb's.

What vga is it ?

[Planet]

VGA Is a reference NVIDIA 580

[G H Z]

Yeah but does it clock like it looks? :p

Big fat short wires, very clean mods. hipro and Sham will approve.

[Hondacity]

is this the "messified"? :D

[k|ngp|n]

Yeah but does it clock like it looks? :p

Big fat short wires, very clean mods. hipro and Sham will approve.

It did above 1400mhz in 11 :D

[phil]

Nice.I had tried a reference card that did 1360 3DMark11@1,45vgpu.Then trying to go further this happened
http://i741.photobucket.com/albums/xx58/filippos1976/dead580.jpg

[k|ngp|n]

Nice one Phil :D
Same here man, I was running that card the other day at 1300mhz/1.5v on stock vrm and TiN was like wtf is that smell? Burned three mosfets on it and it bubbled right thru the back of the pcb. Now its Zombie :D

[TiN]

:D But that's not completely reference 580 here :D

[thebanik]

It did above 1400mhz in 11 :D

but we expect nothing short of 1700Mhz from the Master, :D

[phil]

Nice one Phil :D
Same here man, I was running that card the other day at 1300mhz/1.5v on stock vrm and TiN was like wtf is that smell? Burned three mosfets on it and it bubbled right thru the back of the pcb. Now its Zombie :D
Thanks Vince.Unfortunately I didn't have any untouchables in my hands to bring it back to life:D
I like the plate around core.Helps not bending pcb.Did it came with the card?

[Rsnubje]

the 580 me and diezel had already burned out a mosfet on 1.3v and 1150 core :O

[chispy]

:D But that's not completely reference 580 here :D

:D .

[k|ngp|n]

Thanks Vince.Unfortunately I didn't have any untouchables in my hands to bring it back to life:D
I like the plate around core.Helps not bending pcb.Did it came with the card?

Hey Phil, yah thats a feature of new classified card actually :D. A lot guys are messin their cards up left and right after so many mounts I bet. This bracket will keep the pcb area behind the core stiff for better mounts and less bowing of the card preventing solder ball breakage. I think we've all been there, go to run your card after last benching and on first fire up artifacts everywhere or wont post cuz you busted your ballz.. :D
After literally hundred mounts in lab on one classy still hasn't happened using the stiffening bracket everytime. I can crank the snot out of the bolts on the container without issue.

[chispy]

Hey Phil, yah thats a feature of new classified card actually :D. A lot guys are messin their cards up left and right after so many mounts I bet. This bracket will keep the pcb area behind the core stiff for better mounts and less bowing of the card preventing solder ball breakage. I think we've all been there, go to run your card after last benching and on first fire up artifacts everywhere or wont post cuz you busted your ballz.. :D
.

:rofl: lol

[phil]

Hey Phil, yah thats a feature of new classified card actually :D. A lot guys are messin their cards up left and right after so many mounts I bet. This bracket will keep the pcb area behind the core stiff for better mounts and less bowing of the card preventing solder ball breakage. I think we've all been there, go to run your card after last benching and on first fire up artifacts everywhere or wont post cuz you busted your ballz.. :D
After literally hundred mounts in lab on one classy still hasn't happened using the stiffening bracket everytime. I can crank the snot out of the bolts on the container without issue.
LOL.Looks like classified 580 will be the most advanced 580 in the market when it comes out.Do you need any more beta testers? :D