Chiller's Evga Monsta

[Chiller]

These builds are made possible by and thanks to Aquatuning (http://www.aquatuning.com)

http://www.aquatuning.de/bilder/banner/468x60_eng.gif

Xtreme Case Mods (http://xtremecasemods.com/pages/%2A%2AMODDERS-SHOWCASE%2A%2A.html)

http://i56.tinypic.com/2ijmfky.jpg

Cooler Master (http://www.coolermaster.nl/)

http://i55.tinypic.com/302p7bq.jpg

Zetix (http://www.zetix.be/index.html)

http://i56.tinypic.com/2qnd0ux.jpg


here is my rig, with good hardware and little mod for 24/7 use :

Core i7 975 ES @ 4.74Ghz on air
Evga Classified E759
Corsair Dominator gt 2000Mhz 7-8-7-20 @ 2160Mhz
4x Vertex raid0 +700mb/s on a intel SRCSAS18E raid controller
Silverstone raven window version
Corsair hx1000 psu
2x Evga GTX295

member


YouTube - Chiller's Evga Mod Rig almost the outside complete (http://www.youtube.com/watch?v=J7meu2SsPo4)

Here some ^pics :

http://i41.tinypic.com/2rhn0p0.jpg
http://i41.tinypic.com/1ea13t.jpg
http://i39.tinypic.com/149ml2.jpg
http://i43.tinypic.com/30idwlx.jpg

[Kal-EL]

Yep, thats a monsta system alright, Nice! :up:

[Chiller]

Thanks

now with Classified E759
and later on on the Classified 4way sli mobo.

[Chiller]

i did bought new toys this weekend, and more to come :

Razer MAmba :
http://3.bp.blogspot.com/_ejVhPSXllX0/SW0H6JUzBWI/AAAAAAAAF-w/oahfxmLtt6c/s400/razer-mamba.jpg

Ati 5770 vga :
http://ijk.com.au/branch/ijk/images/11X-HD5770-1GBA.jpg

and a dewar 50 liter ln² :
http://i36.tinypic.com/2wpi7ue.jpg

[Foamy]

that's a beast for sure :D

[*TMWH*]

Nice deware man!

[Chiller]

50 liter is a couple hours of fun hahahahahah

[Karmakazi]

Nice chiller!!! Lets see some damage bro :up:

[Chiller]

damage ?

that's the idea.

[Chiller]

playing now with something new :

http://i37.tinypic.com/2czr2bc.jpg

[Foamy]

Looks good!:D

[Chiller]

not good enough, cpu eats to much Vcore.
not so good cpu, i whanted it to boot stock at 0.9 a 1.0Vcore, but it boots already on 1.19Vcore.

and for 4.3Ghz HT on, the Vcore is high.
But it works.

now just some vga's (4x) and lets have some fun on the E762 and E759

[Yellowbeard]

I have been lazy and not visiting Vince's new site. Very cool looking rig Chiller!

[Chiller]

already on the next case mod busy, it's going to have :

Thermaltake level 10 case limited edition
Classified E759 limited edition
Dominator GTX2 2250Mhz 8-8-8-24
Gulftown Q3QP on Coolit Boreas Mtec chiller's

and some more good stuf.

And modding the case offcourse.

[FireRx]

Very Nice

[Chiller]

the memory is ordered and payed for, and i'm waiting for my package next week with my new memory .

It's about this memory (https://shop.corsair.com/store/item_view.aspx?id=1235506), and i'm going to use it with my Q3QP, and then i share with results how the memory works on E759.
Because the Uncore has to run 2x the memory speed, so the memory is 2250Mhz stock,
so the Uncore needs to be 4500Mhz ????

That huge, i hope the mobo can run it.

[Chiller]

got my new memory and case in the house :

Corsair Dominator GTX2 2250Mhz 8-8-8-24

and a Thermaltake Level 10 Case.

http://i45.tinypic.com/ibw7ti.jpg
http://i48.tinypic.com/2gvps03.jpg
http://i50.tinypic.com/jb4cps.jpg
http://i49.tinypic.com/210j7ms.jpg

http://i46.tinypic.com/2cwx4yv.jpg
http://i47.tinypic.com/r1woxg.jpg
http://i49.tinypic.com/246tdw1.jpg
http://i48.tinypic.com/1037ucy.jpg
http://i50.tinypic.com/m92hw1.jpg

[Chiller]

got a new toy, Freezone Elite Retail MTEC chiller for cpu,
and modding the case a little :

build log : http://yoursystem.be/forum/viewtopic.php?f=28&t=295

http://i50.tinypic.com/2vad1s2.jpg

http://i46.tinypic.com/28aownd.jpg

http://i46.tinypic.com/2mnel8x.jpg

http://i48.tinypic.com/1zx8u8m.jpg
http://i48.tinypic.com/os7ihe.jpg
http://i47.tinypic.com/24b1zzs.jpg

http://i45.tinypic.com/2mwtmv4.jpg
http://i50.tinypic.com/xf59g3.jpg
http://i49.tinypic.com/2remddk.jpg
http://i49.tinypic.com/2qxyzw6.jpg
http://i46.tinypic.com/24pwjsg.jpg
http://i47.tinypic.com/zwibk0.jpg
http://i47.tinypic.com/2ng7fc6.jpg

http://i48.tinypic.com/4uctx5.jpg

http://i47.tinypic.com/2v13mo9.jpg
http://i48.tinypic.com/2uz2iqa.jpg

[Chiller]

http://i45.tinypic.com/27y5ugj.jpg

Pics say more then 1000 words :

http://i47.tinypic.com/2u8w9id.jpg
http://i49.tinypic.com/2u6e5wo.jpg
http://i49.tinypic.com/2rwnxpf.jpg
http://i49.tinypic.com/2u8w7wh.jpg
http://i50.tinypic.com/30vhvgh.jpg

[McTw1st]

Holy crap dude awsome rigg(s), alltho that case is way 2 big for my taste, keep it going :)

[Chiller]

http://i50.tinypic.com/1zeea1v.jpg
http://i50.tinypic.com/1628hty.jpg
http://i50.tinypic.com/21j6kn5.jpg

now building some more Coolit in the case :

news toys in the house :

http://i32.tinypic.com/2s1unpk.jpg
http://i26.tinypic.com/hs1948.jpg
http://i29.tinypic.com/xavx5j.jpg

http://i27.tinypic.com/2mq517n.jpg
http://i30.tinypic.com/124h9pu.jpg
http://i28.tinypic.com/1y5lza.jpg

Everu TEC cooling from coolit needs to go INSIDE the Thermaltake Level 10 case :
http://i25.tinypic.com/2v0lqpc.jpg

http://i45.tinypic.com/27y5ugj.jpg

http://i30.tinypic.com/23wwv1f.jpg

primer :

http://i26.tinypic.com/2cqjne8.jpg

http://i45.tinypic.com/27y5ugj.jpg

http://i25.tinypic.com/2z9csxv.jpg

http://i28.tinypic.com/8ql4.jpg

[Chiller]

http://i45.tinypic.com/27y5ugj.jpg

Freezone Elite and the Boreas Chiller are ready with paint, only sleeving needs to be done :

http://i25.tinypic.com/2vt60cn.jpg
http://i32.tinypic.com/orl3rl.jpg
http://i29.tinypic.com/2q3q1ht.jpg

The Boreas Chiller, and how it's going to be mounted on the Level10 case :

http://www.youtube.com/watch?v=tg4mQPt8K-E

http://i31.tinypic.com/sxi0zb.jpg
http://i28.tinypic.com/se8tjb.jpg

Boreas Against the case instead of the HDD trays, while Freezone and Freezone Elite gets in the motherboard box :

http://i29.tinypic.com/21bu986.jpg
http://i29.tinypic.com/34parg2.jpg

Take the form of the HDD trays with vertical lines and air trap, i will use red smoke acryl :

http://i25.tinypic.com/6f8riw.jpg
http://i28.tinypic.com/b6ddlg.jpg
http://i25.tinypic.com/33mwqjb.jpg

[Chiller]

http://i45.tinypic.com/27y5ugj.jpg

De Boreas Cooler is almost ready, only two more mods on it, and then it can be mounted on the case :

http://i26.tinypic.com/34zy8ec.jpg

Een Classified plate bent, the temp sensor getted a black 3pin plug and instead of sticky tape it has now a heatpad between it :

http://i26.tinypic.com/2ed5rug.jpg

De fan cables are black on the fan, and from the fan in red sleeving :

http://i32.tinypic.com/2ibkt1i.jpg

De Coolit Freezone has 2 broke TEC modules, have to change them with new onces, and then the red blocks can be mounted on the cooler :

http://i32.tinypic.com/148hgro.jpg

the spray corner where i painted the blocks :

http://i31.tinypic.com/jg5buq.jpg

[Chiller]

http://i45.tinypic.com/27y5ugj.jpg

change every bold and nut on hole the pc, also the coolers
http://i29.tinypic.com/6yfvcj.jpg

http://i38.tinypic.com/255uibd.jpg
little mod for the boreas and freezone elite chiller's

http://i34.tinypic.com/2cducko.jpg

http://i35.tinypic.com/2dr8dx4.jpg

http://i33.tinypic.com/2mrbb5j.jpg

http://i35.tinypic.com/2r7bkwp.jpg


only the blue neon has to be change in red neon, they are ordered :
http://www.youtube.com/watch?v=W472AlaLsbA

[Chiller]

http://i45.tinypic.com/27y5ugj.jpg

de Coolit Boreas MTEC Chiller has his place against the case now, a little lower because above the boreas a koolance tms-200 with expansion board will come,
also modded. only making a mat black acrylaat for finishing the hdd bays holes for between the boreas and the case.
And painting the mounting for the boreas also black.

http://i35.tinypic.com/33p3nr9.jpg

today only change the power for the led's in the Corsair HX1000 psu what i made see tru,
and put the first led's in the 5mm fan shroud for the boreas chiller :

PSU
http://i37.tinypic.com/13ypl4y.jpg
http://i37.tinypic.com/34i5szr.jpg

De Boreas Chiller :
http://i37.tinypic.com/30mmq8h.jpg
http://i38.tinypic.com/e8scxs.jpg

http://i38.tinypic.com/2yxgh3m.jpg
http://i36.tinypic.com/2d8qo9y.jpg
http://i38.tinypic.com/1588e3k.jpg

[miahallen]

Great work Chiller....now lets see the numbers :D

[TiN]

Nice modding, but TECs are useless :)

[Chiller]

Great work Chiller....now lets see the numbers :D

with numbers ??? :D

Nice modding, but TECs are useless :)

Why useless ?

For 24/7 it's nice i think, cooling below ambient room temp.

For benching it's nothing, then better Dice or ln2.

[nigel]

i just like it ^^ tec's are just fun ^^ (wel its in my eye's :D)

[Chiller]

i find it also fun for in a 24/7 rig.

cools just that little more then watercooling, and if you have 24 TEC plates,
then it cools just fine for a nice 24/7 OC.

[Chiller]

http://i45.tinypic.com/27y5ugj.jpg

today received 3 packages, so work again on the parts and case, the boreas chiller is finished, no to the Freezone Elite and Freezone V1. :

new TEC plates in tha house, so now i can finish the Freezone V1 cooler :
http://i36.tinypic.com/efgld2.jpg
http://i34.tinypic.com/5nqky8.jpg
http://i33.tinypic.com/t657pv.jpg

the psu painting in black , de thermaltake for the TEC's :

http://i34.tinypic.com/5ufznb.jpg
http://i34.tinypic.com/a9pbpf.jpg

[Chiller]

http://i45.tinypic.com/27y5ugj.jpg

the Coolit Boreas is finished, now the dual bay psu and the rest of coolers :

http://i38.tinypic.com/8y6opl.jpg
http://i37.tinypic.com/f57uy8.jpg
http://i37.tinypic.com/2ihw7yx.jpg
http://i36.tinypic.com/14brte9.jpg

De thermaltake dual bay psu is also finished, pianted outside black, and inside silver for putting the light nice out,
only the psu front i need to put back :

http://i33.tinypic.com/2vimssi.jpg

painted because it looked like this in gold :

http://i35.tinypic.com/33p3nr9.jpg

video with how it looks all now, will be posted shortly

[Chiller]

the video :

http://www.youtube.com/watch?v=VThbPrN9UPI

[Chiller]

http://i45.tinypic.com/27y5ugj.jpg

today i customized the 3D fangrill so it fits on my Coolit Boreas Chiller :

This was how it looks standard :

http://i36.tinypic.com/2n0ltuq.jpg

And after the adjustment, who see the difference ???? lol :tong:

http://i35.tinypic.com/w9f8qp.jpg
http://i35.tinypic.com/1zqvg3s.jpg

And this is how it going to fit in black and red on the Chiller :

http://i38.tinypic.com/rif8zb.jpg
http://i37.tinypic.com/op6wph.jpg

[Mack4033]

Nice job

[Chiller]

http://i45.tinypic.com/27y5ugj.jpg

MAt Black acryl bended with a heatgun, for detail for the Boreas chiller on the HDD bays.

http://i38.tinypic.com/zlzxty.jpg

now waiting to receive the mobo hopefully this week, or at last beginning next week.
Also a nice toy for OC, the Evga EVbot.

The motherboard (hopefully this week)

Mobo SR-2 link info (http://www.evga.com/articles/00537/)
http://i34.tinypic.com/30hpjs9.png

Nice toy for OC on the mobo :

EVbot link info (http://www.evga.com/articles/00521/)
http://i35.tinypic.com/2i0dkd2.jpg
http://i36.tinypic.com/2i29avo.jpg

Only problem is that the case needs a big adjustment for fitting the mobo in the case,
but it will work how i whant it.

i can also use a backplate likes this, but i will keep the original backplate of mobo, but adjust it :

http://i33.tinypic.com/24qs7xi.jpg

If you look at the sizes of the Classified ATX mobo (30.5 x 26.4cm) against a SR-2 E-ATX (34.6 x 38cm) :

http://i37.tinypic.com/25hzsk7.jpg

the case will need some adjustments lol.

[Chiller]

http://i45.tinypic.com/27y5ugj.jpg

Mounting for the Boreas Chiller made, was first the HDD trays.
Now made mat black acryl with behind the mounting plates for the boreas chiller.
And still need to finish it nice off and put holes for the cables of the boreas :

http://i52.tinypic.com/2ec3zba.jpg
http://i51.tinypic.com/2ns5g2g.jpg
http://i56.tinypic.com/1z6ckmh.jpg

[Chiller]

http://i45.tinypic.com/27y5ugj.jpg

first package is in :

the box :

http://i51.tinypic.com/99pe14.jpg
http://i53.tinypic.com/9ih7vt.jpg
http://i54.tinypic.com/33e09b5.jpg

what's inside ?

(the cd is only for flashing the EVbot to new firmware)

http://i56.tinypic.com/2j4o6d4.jpg

[Chiller]

http://i45.tinypic.com/27y5ugj.jpg

Thanks to :
http://i52.tinypic.com/34zaasj.jpg

everu part will be shown when it's used in something :

http://i55.tinypic.com/155gzgj.jpg

Let's start with the ZERN res, with will get black screws, smd-led's for lightning, and UV red fittings in it, also a Phobya Overpressure valve :

http://i53.tinypic.com/25a0rgj.jpg

[Chiller]

because i am waiting today for the motherboard arrive,

i am doing a little sleeving, soldering,
because i changed the connectors on the koolanc controller, i also need to change them on everything what will be connected on it.

now i have 1 koolanc flowsensor, atx power and the internal usb done :

http://i51.tinypic.com/10x982v.jpg

[Chiller]

http://i45.tinypic.com/27y5ugj.jpg

Mobo is in ta house. And it's big and heavy.
Now fitting in the Thermaltake Level 10 case.
And adjusting the case to the motherboard.

also ordered a 10 PciE IO-Shield of Dangerden :

http://i51.tinypic.com/ke92ft.jpg

Enjoy the pics :

http://i52.tinypic.com/244bfax.jpg
http://i52.tinypic.com/2s7k8.jpg
http://i55.tinypic.com/1zg95j9.jpg

[Canis-X]

This looks very VERY nice!! Great work! Look forward to the final build pics!!

[Chiller]

http://i55.tinypic.com/2rohoap.jpg

http://i55.tinypic.com/2rqim9f.jpg

http://i53.tinypic.com/154a6uq.jpg

[nigel]

Dude are you Croiman? :p

Further more love the hardware in the stuf ^^

[Chiller]

yep, it's me yes

[nigel]

yep, it's me yes

that explains it all :p

(i tought this build looked like something i new :up:)

[Chiller]

http://i45.tinypic.com/27y5ugj.jpg

very small update, making little adjustments on the fan for a little more airflow.

this is how it looked after i changed the outside :
http://i35.tinypic.com/w9f8qp.jpg

a first little piece is changed, tomorrow will be more :
http://i53.tinypic.com/dqpzy1.jpg

and this is what we going to change :

http://i54.tinypic.com/2qipgef.jpg

[Chiller]

Here's the 3d fan grill in primer with the adjustments for a little more airflow, ready to sand again :

http://i54.tinypic.com/2q0u77r.jpg

[Chiller]

http://i45.tinypic.com/27y5ugj.jpg

the mounting for the Boreas chiller is ready exept for the holes to put the wires and tubing tru :

http://i55.tinypic.com/106gep5.jpg

fan grill got it first paint job , is get dry now :

http://i55.tinypic.com/2ia3ddj.jpg

and the front plate for the drive bays has a primer :

http://i54.tinypic.com/2n8wu9y.jpg

and first paint job in mat black (just fresh, needs to dry) :

http://i55.tinypic.com/6zr2wi.jpg

[Chiller]

front plate drive bays :

http://i55.tinypic.com/155i1ox.jpg
http://i53.tinypic.com/atqm3p.jpg

[Chiller]

cpu are in ta house !!

even the same batch number batch, matched pair

http://i52.tinypic.com/2nsye.jpg
http://i56.tinypic.com/2627io2.jpg

[steponz]

Pretty nice..... love how its an sr2.. should finally have my other x5680 soon... LN2 action for me... might retire it to something like this.....

Really do love it...

The only thing is it just seems to be missing something from the front... Not sure what.. just seems like its missing something....

Keep up the great build.. :)

[Chiller]

in the front i will put a slot-in dvd slim drive, and make a acryl faceplate

[steponz]

cool.. .can't wait to see the results.... very nice...

I used to have a boreas a while ago... any plans for watercooling the board?

[Chiller]

yes, looking for the best full cover block for the mobo.

there seems to be a heat probem with the EK block on SR-2 with the CPU0 PWM 65°C mentioned.

so waiting for results on the BP and Koolanc blocks how they perform

[steponz]

Im not a big koolance fan.. usually... I would probably float the bp way... Koolance products have failed quite a bit when I have bought themm.... lol

Your probably going to want a different loop for that also.... hot, hot, hot...

[Chiller]

what the best blocks are for this mobo, i buy

http://i45.tinypic.com/27y5ugj.jpg

Little update,

Coolit Freezone Elite is ready to and cpu's are on the mobo ,

And here are some pics of the total view :

http://i55.tinypic.com/nccies.jpg
http://i53.tinypic.com/4hwh6o.jpg
http://i51.tinypic.com/2nq4k8y.jpg
http://i55.tinypic.com/24osj8l.jpg

[Chiller]

http://www.youtube.com/watch?v=bggiAcJvV2I

[Chiller]

http://i45.tinypic.com/27y5ugj.jpg

today i sleeved the cables for the Evga EVP OC Panel V3,
Also the flat ide cable etc

And made a cable to extend the Connector from the motherboard EVbot in the IO-Shield to the front of the pc :

enjoy the pics :

http://i1210.photobucket.com/albums/cc419/chiller2/20100924_002.jpg
http://i1210.photobucket.com/albums/cc419/chiller2/20100924_001.jpg
http://i1210.photobucket.com/albums/cc419/chiller2/20100924_003.jpg
http://i1210.photobucket.com/albums/cc419/chiller2/20100924_008.jpg

Here you see the difference between the Classified ECP Panel, and the SR-2 ECP Panel V3 :

http://i1210.photobucket.com/albums/cc419/chiller2/20100924_009.jpg

Extending cable for the EVbot :

http://i1210.photobucket.com/albums/cc419/chiller2/20100924_004.jpg
http://i1210.photobucket.com/albums/cc419/chiller2/20100924_005.jpg

Also did some cables of the coolit coolers and the Psu for it, the thermaltake Dual bay 650w psu :

http://i1210.photobucket.com/albums/cc419/chiller2/20100924_001-1.jpg

Enough MDPC-X sleeving (few hondred meters) ?

http://i1210.photobucket.com/albums/cc419/chiller2/20100924_002-1.jpg

[Chiller]

http://i45.tinypic.com/27y5ugj.jpg

changing the connecting on my mobo in 90° angle :

http://i53.tinypic.com/712.jpg

[Chiller]

http://i54.tinypic.com/x4os4.jpg

[Chiller]

allmost finished, just have to make it nice :

http://i52.tinypic.com/6z5x80.jpg
http://i51.tinypic.com/b7maea.jpg
http://i55.tinypic.com/n34xe1.jpg
http://i55.tinypic.com/2q1urs4.jpg
http://i52.tinypic.com/sp90tx.jpg

[Kal-EL]

Cool mod mang :up:

[Chiller]

thanks

[Chiller]

http://i45.tinypic.com/27y5ugj.jpg

Two Koolance 360 rev1.1 , and Koolance SR-2 Classified full cover block are arrived :

http://i54.tinypic.com/33ud4it.jpg
http://i54.tinypic.com/2ly64ap.jpg

after received it, let's open up the full cover block SR-2 and change it a little bit :

http://i53.tinypic.com/2gv6bye.jpg

a lot of sanding it to get the nickel of it, and then the first layer of primer :

http://i53.tinypic.com/21k9mr4.jpg
http://i56.tinypic.com/10idipw.jpg

first layer mat black is on, tomorrow sanding it and paint it the last time for finishing touch,
after when it's dry mount the block again and put it on the motherboard :

http://i52.tinypic.com/6pymfn.jpg
http://i55.tinypic.com/zjzb4i.jpg
http://i54.tinypic.com/2ze9fee.jpg

[Chiller]

http://i45.tinypic.com/27y5ugj.jpg

SR-2 full cover block is ready and mounted :

http://i55.tinypic.com/dq5e1j.jpg
http://i54.tinypic.com/14dd72e.jpg
http://i52.tinypic.com/5xk01c.jpg
http://i55.tinypic.com/2d7ikpy.jpg

[nigel]

looks good on the board :)

[Chiller]

i hope the complete pc will look good with what i'm doing in this rig for 24/7.

After that benching again

[Mack4033]

Very nice

Thanks,
Mack4033

[Chiller]

pics of what i did today :

from this :

http://i51.tinypic.com/2ntbxwl.jpg

i made these, and a little bit more, only waiting for a new shipment of red connectors :

http://i55.tinypic.com/20r8dxz.jpg

[Chiller]

http://i45.tinypic.com/27y5ugj.jpg

today received package with connectors :

http://i55.tinypic.com/p883s.jpg
http://i52.tinypic.com/70ciz7.jpg

i made this, and have to make more of them for the other cpu and vga power on mobo :

http://i53.tinypic.com/w0osw5.jpg
http://i53.tinypic.com/2utjn1w.jpg
http://i51.tinypic.com/1xxjki.jpg
http://i53.tinypic.com/1zwytqb.jpg
http://i51.tinypic.com/2eur3vk.jpg
http://i55.tinypic.com/4uann6.jpg

and for the 90° corner of mobo has his place, tru the wall behind the Boreas Chiller, and also the tubing for the little isolated reservoir :

http://i51.tinypic.com/2a5hbvs.jpg
http://i52.tinypic.com/2u7lj88.jpg
http://i52.tinypic.com/2ry66va.jpg

[Chiller]

http://i45.tinypic.com/27y5ugj.jpg

The other cpu his power cable is also done, and the PciE cable also :

http://i52.tinypic.com/11c48sp.jpg
http://i52.tinypic.com/211qye1.jpg
http://i51.tinypic.com/2nkub01.jpg

Total overview of the powercables on the motherboard, the green circle is where the cables leave the case to the other side for connection to the powersupply :

http://i56.tinypic.com/adyh61.jpg

[Canis-X]

Still watching Chiller and it is coming along very nicely!! I check in at least once a day. Keep up the great work man!!

[Chiller]

i'm working as fast and as much i can on it, because i whant to game with it lol.

Nut also play with OC chilled,

waiting for the alu plate 1.5mm and acrylic

[Chiller]

http://i45.tinypic.com/27y5ugj.jpg

new parts in :

Evga SR-2 1200w (peakload 1700w) psu

Due to U.S. regulation, power draw over a typical household 110-volt AC line limits the PSU-1300ATX-12N to 1300W. However, the unit is fully capable of a continuous 1700 watts when powered from a 220V AC circuit. Users are responsible for supplying adequate AC power for the PSU-1300ATX-12N.

http://i55.tinypic.com/24phw0z.jpg
http://i54.tinypic.com/ayqzv4.jpg

PciE connector for GPU's with a 2200UF (MicroFarad) condensator and ferrit-cores :

http://i53.tinypic.com/33d9jqe.jpg

Cpu ATX power connectors, also with 2200UF (microFarad) Condensator and ferrit-cores :

http://i56.tinypic.com/20j304i.jpg

and te best part of the power supply is on the back of it lol :

http://i54.tinypic.com/24edx74.jpg

Also LGA1156 socket isolation and new inox Backplates for my SR-2 :

http://i53.tinypic.com/25f57i0.jpg

also i got two red displays in for on my controller.
To swat the green light lcd out for a red symbol / black background display :

http://i55.tinypic.com/jtw040.jpg

[Chiller]

http://i45.tinypic.com/27y5ugj.jpg

take a HB624 controller with ALMEGA88V chip :

http://i51.tinypic.com/5wyo38.jpg

put some cables and a pot meter on it :

http://i53.tinypic.com/ebehad.jpg

with the pot meter 10K i can adkust the screen light :

To see real time the 12v rail of the SR-2 powersupply, and monitore the power drawn of the three coolit coolers :

http://i54.tinypic.com/24vk7so.jpg
http://i56.tinypic.com/r91zy9.jpg

cpu disable jumpers soldered for make the connector for it in front of the case :

http://i55.tinypic.com/2ytwqo8.jpg

need to cut new Socket isolation because SR-2 has no big condensators next to the sockets, so i can use some more isolation : :

http://i54.tinypic.com/2igiueu.jpg

putted also three temp sensors under the full cover blok, to measure the CPU PWM 1 en 2 and the NB temp
with a Koolanc TMS-200 controller :

http://i56.tinypic.com/1znxsog.jpg
http://i56.tinypic.com/r0ytcm.jpg
http://i53.tinypic.com/293ex6s.jpg

total overview of the mobo in current state:

http://i54.tinypic.com/10pc3th.jpg

[TiN]

some pics not showing.

And what is that board with atmega? Chip on top looks like allegro current sensor, no? Describe more)

[Chiller]

all pics are now visible.

The chip on top for current measure is a

ACS712t
ELC-20A

But it is possible that this is just enough, or just not enough,

Because the three coolers will draw around 250 a 300w 100% load on 12v,

so that will be between 20 a 25amp.

hope it's strong enough, otherwise take a 25amp or more.

on the controller i have the 12v of the SR-2 power supply (can adjust on the back op psu),

and current amp and watt use of the coolers.

[TiN]

Just recently bought ACS713-ELC30A, coz ACS750-075 (75AMPs) are not satisfying me :) What controller is that? Any schematics of it? I'm interested :D

Awesome red backlight for LCD if that how it looks in real. I see you loving RED in your project. As for my taste - too much red everywhere, but it's your build anyway :) I like your attention to details.

[Chiller]

acs713-elc30a are they 30amps ?

and 75amps not good ?

Here you got more info about the stuf i used :

The red lcd module : http://www.ladyada.net/media/lcd/RT162.pdf

and the powerusage module : http://www.h-tronic.eu/product_info.php?info=p163_performance-measurement-module--power-meter-.html

[TiN]

Yes, 75A sensor provide only 19.5mV/1A sensitivity. So measuring for example 0.1Amp or values with resolution less than 1A is not an easy task for internal ADC of ATmegas.

I've covered that a bit - http://kingpincooling.com/forum/showthread.php?t=889

[Chiller]

you got a reply there lol :whistle:

[nigel]

Hey Chiller,

where do you get that stuf? I mean i've been looking everywhere for such stuf to be honoust :p

[Chiller]

which stuff you mean ?

[nigel]

which stuff you mean ?

Electronics ;)
lcd screens and such ;)

:)

[Chiller]

online webshops ............

[nigel]

online webshops ............

:D

That i now :p
but lcd screens i have not been able to find a good suplier ;)
thats the problem ^^

[Chiller]

you also red lcd like i have ?

[Chiller]

http://i45.tinypic.com/27y5ugj.jpg

today little testing en measurement, the boreas chiller and the freezone will be hanged on the power use controller.
http://i52.tinypic.com/2eoihi0.jpg

but a lot of cables here that needs to be in the case fitted.

http://i51.tinypic.com/2898nkm.jpg

[Chiller]

http://i45.tinypic.com/27y5ugj.jpg

Alu plaat of 1.5mm is in, tomorrow making the adjustment of the mobo cover :

http://i51.tinypic.com/m4qxj.jpg

[Chiller]

http://i45.tinypic.com/27y5ugj.jpg

Today being busy with making place for all the usb cables, power led, hdd led etc to go away from mobo as fast as possible, not to show to much cables in case.
Also adjusting some things to get the mobo cover enlargement fitted on case,
used a lot of dremel cutting disks :

http://i51.tinypic.com/34qpv2h.jpg

And because the Evga SR-2 mobo doesn't have condensators like a normal LGA1366 mobo around the socket, i needed to make some new socket isolation kits for around cpu with more amramflex, pictures will say enough :

http://i54.tinypic.com/2igiueu.jpg

And here you see the normal cut-out of a lga1366 socket kit and that for a Evga SR-2 mobo :

http://i54.tinypic.com/20p5v08.jpg

[TiN]

Hey man, what is your native lang? They are capacitors afaik :D

[Chiller]

i mean these ones :rofl: :

http://i52.tinypic.com/jt3uxx.jpg

[Chiller]

just bended the alu plate in the same curve as the standard mobo cover also have :

http://i53.tinypic.com/qx2xxz.jpg

The curve in the red circle, the green lines is untill where the mobo cover needs to get bigger for the bigger mobo :

http://i54.tinypic.com/fxxjxi.jpg

[Chiller]

http://i45.tinypic.com/27y5ugj.jpg

The original mobo cover has a serious cut-out for the adjustment,
and you see the four square holes for mounting the new alu plate :

http://i56.tinypic.com/wc0far.jpg

This is the bottom of the original mobo cover, is a serious cut-out on,
so Quad sli GTX480 still fitts :

http://i56.tinypic.com/2m5xdmv.jpg

The new alu plate working on :

http://i53.tinypic.com/28tuxl5.jpg

And here it's fitted on the case base plate :

http://i55.tinypic.com/wqzjag.jpg

Nice fit :

http://i52.tinypic.com/wbt9nm.jpg

And with the base plate of the big Boreas Chiller,
you see that the ATX 24pin needs a cut-out, and two tubing with a BP fitting,
also the Coolit Freezone V1 needs his place in this plate :

http://i51.tinypic.com/2e0mget.jpg
http://i51.tinypic.com/2j47uia.jpg

And here you see what also needs to be cutt-out in alu plate :

http://i54.tinypic.com/29m8xhz.jpg

[Chiller]

also with very small iron files i have to make the honey roster on another place :

http://i56.tinypic.com/15d8f94.jpg

[Chiller]

Update after some hours work :

the BP fittings are in place also the cutt-out for the ATX 24pin :

http://i54.tinypic.com/15i3oyv.jpg

BP fittings close-up :

http://i56.tinypic.com/ilkk69.jpg

The outcome of the atx24pin :

http://i53.tinypic.com/2mwaxs4.jpg

Inside of the ATX24pin :

http://i52.tinypic.com/11hsby9.jpg
http://i55.tinypic.com/2hncmbo.jpg

A Total overview with the motherboard and his power connectors installed for viewing cable routing :

http://i52.tinypic.com/2055rwj.jpg

CPU1 Close-up :

http://i55.tinypic.com/21l4zlx.jpg

CPU0 Close-up :

http://i51.tinypic.com/27zx8br.jpg

ATX 24pin close-up :

http://i55.tinypic.com/wkljdk.jpg

ATX 24pin Close-up while motherboard is plugged in :

http://i53.tinypic.com/23j4klx.jpg

Total View ATX24 pin :

http://i55.tinypic.com/24w7x5d.jpg

TOTAL overview mobo + atx connectors , alu plate :

http://i51.tinypic.com/m9sr5f.jpg

[Foamy]

Hey man, what is your native lang? They are capacitors afaik :D

It's dutch :)

Elco or capacitor = condensator in our language :)

[steponz]

Keep it going Chiller... Great job so far.. :)

[Chiller]

busy on fitting the Coolit Freezone V1 under the mobo cover :

http://i54.tinypic.com/izrczk.jpg

And making by hand the honey roster like the original was a never ending thing, and was not nice,
so i will make another solution as roster to protect the fan :

http://i56.tinypic.com/34pj9ya.jpg

[Chiller]

Working on the case again al day, bend the alu plate, making some acryl ready,
the extra piece of hight is for the cpu power cables of the left cpu :

http://i53.tinypic.com/crbzn.jpg

With the cooler on his place :

http://i55.tinypic.com/zvx8n7.jpg

With the red acryl on his place also for the enlargement of the mobo cover :

http://i51.tinypic.com/2qtfg4x.jpg

And then as last also grey smoke like on the cpu cooler left en on the vga's, is for breading room :

http://i55.tinypic.com/4rxnyt.jpg

[Chiller]

for today i quit, tomorrow is another day for fooling around with this case :

http://i54.tinypic.com/20gdz0o.jpg

[Chiller]

here are some new pics, with a little modification on case :

http://i51.tinypic.com/f3uias.jpg
http://i53.tinypic.com/344trbs.jpg
http://i55.tinypic.com/10rlqfa.jpg
http://i55.tinypic.com/ifdicz.jpg
http://i51.tinypic.com/vsm444.jpg
http://i54.tinypic.com/2uhbus4.jpg

[Canis-X]

Looks good!!! Keep up the great work! You are making me want to mod my case further....what I would do, I have no idea, but I miss doing projects!! LOL :up:

[Chiller]

miss doing is big word, as long if it's like you whant it, then it's good.

Make it for yourself and not for everybody, just do your own thing and go for it

[Chiller]

here are some pics of what i did today, it still needs some work offcourse.

But now you got an idea how i will do it :

http://i54.tinypic.com/2cxaxb7.jpg
http://i51.tinypic.com/fyzo6u.jpg
http://i51.tinypic.com/2ihar09.jpg
http://i51.tinypic.com/27ywjfl.jpg

[Chiller]

this is what i did today :


http://i54.tinypic.com/20ped4y.jpg

http://i55.tinypic.com/30rv4sk.jpg

http://i53.tinypic.com/iyd0yo.jpg

[nigel]

Damn i want to see this baby finnished :D

[Chiller]

me to......

[Chiller]

today i give the alu plate some more shape :

http://i51.tinypic.com/103zdbm.jpg
http://i56.tinypic.com/2cptbab.jpg

[Chiller]

Today i made the plexi acryl,
tomorrow sanding, prime and paint the alu parts (if i'm up for it)

Now it's good visible what i whanted to do with the case to fit the bigger mobo SR-2 in this case (normally no fit lol)

Sorry for the bad pics, not enough light but i whanted to show you guys already what i did today :

http://i52.tinypic.com/2j3gshx.jpg
http://i56.tinypic.com/6xzzmv.jpg
http://i55.tinypic.com/w0kknd.jpg
http://i55.tinypic.com/312wgp2.jpg
http://i52.tinypic.com/2i93zlt.jpg
http://i56.tinypic.com/23u9dv7.jpg
http://i53.tinypic.com/1zb5hs9.jpg

[Canis-X]

It's going to look fantastic once you are done!!! I am excited for you and look forward to your final result......and some benchies!!!! LOL

[Chiller]

OOoohhhhh yaaa, benchies, this for 24/7 setup, hope it will give nice performance,
also hope for a nice 24/7 OC

[Chiller]

Here are some better pics in daylight.

I didn't close the cover good, it's not that it has a space between it lol.

The parts have now there first primer coating :

http://i51.tinypic.com/jaavdt.jpg
http://i53.tinypic.com/2nle1id.jpg
http://i56.tinypic.com/2vay2w7.jpg


And here the first parts in primer, i sprayed it very thick,
because i nedd to get al the tiny flows sanded out of it, but will get more layers :

http://i51.tinypic.com/2en2kbk.jpg

[Chiller]

primed en sanded, nog putting on the first layer of MAT black paint, only the pics sucks lol :

http://i54.tinypic.com/2w350cy.jpg
http://i56.tinypic.com/2ih9fo6.jpg

[Chiller]

http://www.youtube.com/watch?v=A0RWZ514aoQ

[steponz]

One problem chiller.. .how long does it take to get to my house.... rofl...

What hardware is in it? I have my x5680's just sitting til I get some with them on ln2... :)

[Chiller]

i think a long time to get to you why?

hardware will be :

Evga SR-2 mono (have it)
Evga SR-2 1200w psu (have it)
two X5550 same batch nr's (have them)
corsair Dominator GT 2000Mhz cl9 12Gb triple kits (need to order)
Evga GTX580's (need to order)
Ocz RevodriveX2 240Gb (need to order)
Coolit Boreas Chiller, Freezone Elite and Freezone V1 coolers (have them)
koolance cpu 360's blocks modded mounting plate (have them, need to do mod)
Koolance SR-2 full cover block (have it)

and some more stuff.

i rather wait for the X5690's next year, that's why i didn't buy the X5680's now.

[Chiller]

the alu plate for the mobo cover is painted and mounted, here some pics of it :

http://i56.tinypic.com/24wr80o.jpg
http://i53.tinypic.com/9std3n.jpg
http://i51.tinypic.com/2mxlo4p.jpg
http://i53.tinypic.com/6omuxc.jpg

[nigel]

looking good ;)

[Chiller]

damn, i got a mosquito in my fresh paint on the big alu plate,
sanding it and paint again :


http://i56.tinypic.com/2dlrx4g.jpg
http://i51.tinypic.com/t4u6ow.jpg

[Chiller]

here a little teaser :

http://i51.tinypic.com/16j4p60.jpg

[Chiller]

putting the isolation on the backplates of mobo, with the inox backplates :

http://i53.tinypic.com/2dgor45.jpg
http://i52.tinypic.com/2wdy4og.jpg

And this is how the case is on this moment, also fitted a 16x2 red/black lcd above the Boreas chiller.
Also you see now how hidden the ATX24pin really is, pure cable management with the 90° connectors :

http://i51.tinypic.com/rjkuwk.jpg
http://i52.tinypic.com/w191mo.jpg
http://i52.tinypic.com/2dub31u.jpg
http://i51.tinypic.com/1217cdu.jpg
http://i53.tinypic.com/105edqh.jpg
http://i51.tinypic.com/200xnoz.jpg
http://i56.tinypic.com/2qamqdl.jpg

[Chiller]

Total overview of the case how he's now.
Most of the cables are on/in it : audio, usb, powerswitch, hdd led, power led, reset, reset led, debug lcd, 2 sata, all atx and pci kabels.

Evga PSU is also on his place together with the dual bay psu in front :

http://i52.tinypic.com/2hfqmj6.jpg

overview of mobo with all cables on it :

http://i55.tinypic.com/ivwqrr.jpg

Also i have made a cable for the EVbot connection in the mobo IO-Shield, so the connection will be in the front plate, where it's easier to acces to hook up the EVbot :

http://i51.tinypic.com/34yrbs0.jpg
http://i51.tinypic.com/r2m2s8.jpg

Total overview of the current cables in the case lols,
but they are not all the cables yet, and need also some controllers to put there
(coolit, koolance, poweruse) :

http://i54.tinypic.com/35n2g4w.jpg

[Chiller]

New Armaflex lasercutted is in, and fits the SR-2 with waterblock perfectly :

http://i53.tinypic.com/25aueys.jpg
http://i56.tinypic.com/j8nz92.jpg

[Chiller]

Here are some pics with all coolers on there place, now you see also why i make the 90° connectors on the mobo :

http://i55.tinypic.com/15817pk.jpg
http://i53.tinypic.com/scxocy.jpg

Here you see, with fittings and all, i calculated just enough space for cpu block etc :

http://i55.tinypic.com/24fco7a.jpg


and this is why i made those 90° connectors, so maximum on cable management :

http://i51.tinypic.com/2eultti.jpg

[Canis-X]

Damn fine work man!!! It is coming along very nicely to say the least!!!

[TiN]

I wish photos could be better...

[Chiller]

i'm now busy with soldering smd led's lol

[Chiller]

next layer of armaflex :

http://i56.tinypic.com/2j0ihkh.jpg

Cut-out for the waterblock :

http://i54.tinypic.com/a5j9fb.jpg
http://i52.tinypic.com/95y4wm.jpg

And also soldering some SMD-led's for in the case,
when you solder these smd-led's be shure you use Kynar whire, THE wire for working with SMD's :

http://i53.tinypic.com/243hkiw.jpg

And putting the smd-led's on place with double component epoxy :

http://i53.tinypic.com/m9stbs.jpg

Just like i put 320 smd-led's in previous casemod : Chiller's Evga Monsta :

http://i51.tinypic.com/2d84bp0.jpg
http://i56.tinypic.com/m1o1x.jpg

[Chiller]

http://i54.tinypic.com/2u7atr9.jpg

[Chiller]

http://i54.tinypic.com/mcq0hy.jpg
http://i52.tinypic.com/21kcfo0.jpg
http://i52.tinypic.com/zwcp3m.jpg
http://i54.tinypic.com/21sf8n.jpg
http://i54.tinypic.com/t9us0i.jpg

[Q56_Monster]

That is cool:up: What are you going to use for the water chiller?

[Chiller]

the coolit boreas freezone and freezone elite?

what i'm going to use ? what do you mean?

Do you mean the liquid ?

For liquid i'm going to use : Fluorinert liquid.

[Chiller]

I cut up an Evga ECP Panel for building it in the front of my case.
little soldering, and i will have a EVbot connecting in front, a DEBUG lcd, Clear CMOS switch and switches for disable PciE and cpu's.

This will be build in a Lian-Li slim-drive Bracket where together with a slot-in dvd drive also can go two SSD harddrives in it :
i cut the ECP Panel up because you see always mods with just the ECP Panel screwed in the case, now i change this to my own taste.

http://i55.tinypic.com/jgm8tu.jpg

Here is the Lain-Li slim dvd drive bracket,
(bought in usa)

Here you see how i build in all the different switches, lcd en connectors, these will come behind a grey smoke acryl plate :

http://i54.tinypic.com/2ewh7gx.jpg

Clear CMOS with his tiny hole :

http://i51.tinypic.com/2hpjghk.jpg

Total overview of the case :

http://i52.tinypic.com/16byfs7.jpg

http://i53.tinypic.com/25islf4.jpg

http://i54.tinypic.com/25g4f3s.jpg

In the case it's still dark, but also on the graphics cards will come nice mods etc......:

http://i56.tinypic.com/142c8iu.jpg

http://i51.tinypic.com/98sqp3.jpg

http://i51.tinypic.com/2vhyk2v.jpg

http://i55.tinypic.com/v656wz.jpg

http://i53.tinypic.com/119w0vb.jpg

[Chiller]

http://www.youtube.com/watch?v=szo-xs4Nkys

[Chiller]

little update for tonight,

the Evga ECP Panel of Classified mobo's, i cut it in pieces,

http://i55.tinypic.com/jgm8tu.jpg

And this is what i did with those pieces, i only whanted to use the Clear CMOS button and the debug lcd,
also i enlarged the connectors in the IO-Shield of the Evga EVbot to the front plate for easy acces.
There still needs to come a slim dvd drive slot-in and a grey smoke front plate :

http://i52.tinypic.com/1z6cjyt.jpg
http://i53.tinypic.com/viegc2.jpg

[Chiller]

have taken the front panel connector of my old intel skulltrail mobo (dremel in mobo)

http://i52.tinypic.com/svkufs.jpg

And used this connector in my slim drive bay of lian-li, together with the ECP panel i cutted up,
so that i can hoop up the ECP panel cable of mobo in my dvd drive,and from here everything will be splitted to debug lcd, power and reset switches and cpu/PciE disabled switches

http://i56.tinypic.com/oh0n7o.jpg

and hhere you see it, connector for ECP panel connector that comes from mobo, and connector for power and reset switches :

http://i55.tinypic.com/6yz0io.jpg

also the halve of the cables is managed, have some more cables to do and connectors to solder.
Have also the Koolanc TMS-200 controller build-in the case and hooked up the first cables and sensors

[Chiller]

little update :

i'm still waiting on some small packages to arrive:

Sata slim line dvd RW drive :
http://i53.tinypic.com/2ik34w0.jpg

Sata slim drive adapter to normal sata :

http://i55.tinypic.com/154911w.jpg

adapter on it screwed :

http://i51.tinypic.com/315nxbs.jpg

red smd-led strips for some light inside the case :

http://i52.tinypic.com/zy7qt0.jpg

3x Nexus air-beamers for 80/92mm fans, also here comes a nice mod with in the case,
also some 3mm led's , 1 for the freezone V1 cooler, the other one is for in SB of Mobo full cover block instead of the stock blue led's :

http://i55.tinypic.com/sxgi1d.jpg

[Chiller]

As you can see in 1 drive bay in my rig can hold more then 1 item , is multi functional :

Debug lcd
clear cmos
EVbot connector
disable cpu's/PciE's
HDD for extra space
and dvd drive itself

http://i52.tinypic.com/259zbq9.jpg

[TiN]

habe taken the front panel connector of my old intel skulltrail mobo (dremel in mobo)

Ur evil 11!! So harsh, to such a mobo. I will not forgive that to you :D

[Chiller]

lol, you can use something from the Skulltrail mobo Tin ? :whistle:

[TiN]

NF200 bridges for PCI-Express doubler LOL :D

At least lotz of capacitorzzz for crazy DC-DC monsterss :D :P

[Chiller]

you whant all kind of capacitors ?

i can arrange that, i got 8800ultra, 9800GX2, rex x48, Skulltrail, some vga's and laptop mobo's i can rip off,

and what nice toy can you offer me if i send you caps? :shrug:

you can use NF200 chips ? i think i can get them off with heatgun.....:D

[TiN]

if you take them off with heatgun - most useful to do is to decorate trash bin with them. Heat gun is no-no when talks go for proper mounting BGA parts. :)

I will think about what I could let out for you ;). It's not fast , I think next year time for it ;)

[Chiller]

ok, i look forward to it.....

[Chiller]

little update, received my prize today, pics will say enough :

http://i52.tinypic.com/15k5fc.jpg
http://i52.tinypic.com/wv27nc.jpg

[Chiller]

got new bolts in red alu, and switchen for disable pciE and cpu's

http://i51.tinypic.com/2ih2p2s.jpg

[Chiller]

2 new cpu-blocks are on their way :

http://i54.tinypic.com/1ptfyv.jpg
http://i54.tinypic.com/207x6qg.jpg

[Chiller]

little update :

i still needed a fan grill, but stock grills i didn't like :

http://i53.tinypic.com/25islf4.jpg

so i did this with an airguard grill :

http://i55.tinypic.com/34domf4.jpg

http://i55.tinypic.com/2ia756r.jpg

http://i53.tinypic.com/28hd5yt.jpg

[Rsnubje]

rc car parts for modding :D looking good chiller;)

[Chiller]

if you whant red stopping bolts, don't have much choice

[Rsnubje]

true:) wondering what else you can use from car parts:P

[Chiller]

i whanted first the disable PciE and cpu switchen what are jumpers on the evga ECP Panel in the front panel.
But i changed my mind, so nobody can fidle with them, i put them on the back of the dvd drive next to the connector of it.

http://i56.tinypic.com/wh09zq.jpg

[Chiller]

drive bay is ready, now with the PciE and Cpu switchen on it.
ready to build in and make the front plate of grey smoke :

http://i55.tinypic.com/14ecbhh.jpg

[Chiller]

drive bay is finished, now only makinjg the front plate, grey smoke acryl,

here you see the connectors for power power led reset and reset switch
cpu and pciE disable, ecp connector to mobo,

and in front the Evga EVbot connector, debug lcd and clear Cmos switch :

http://i51.tinypic.com/w2i0pl.jpg
http://i56.tinypic.com/120s9e9.jpg

[Chiller]

Busy on the clean front plate of grey smoke acryl.
Now made the EVbot connector in place,
only the dvd cut-out and clear CMos and offcourse the drive bay PSU needs some fresh air to.
The outside needs to be finished at the end :

http://i51.tinypic.com/24gw22b.jpg
http://i54.tinypic.com/s66ag9.jpg

[Chiller]

little update, pics say enough i think :

http://i52.tinypic.com/2qm13yd.jpg

http://i55.tinypic.com/23tjm74.jpg

[Chiller]

i need 125 votes ASAP in each category for getting extra points, please vote for

Custom tec for i7

http://forum.newmodcity.com/viewtopic.php?f=116&t=995

Chiller's hybrid SR-2

http://forum.newmodcity.com/viewtopic.php?f=116&t=996

[Chiller]

here a little update of my front plate, only need to find a nice grid to put in there so it comes nice untill the front :

http://i53.tinypic.com/5bxt7l.jpg

[Chiller]

please vote for EPIC PC : http://forums.bit-tech.net/showthread.php?t=198908

[Chiller]

second pump is added and on his place, thirth pump will come under the new bodem in the case :

http://i53.tinypic.com/dpfnz9.jpg
http://i53.tinypic.com/14bsuo3.jpg

[Chiller]

i made my eject button for the dvd drive in red acryl with a red SMD-Led 0805 behind it.
I can switch easy between hdd activity led or Power led :

http://i56.tinypic.com/1z6rvb4.jpg

http://i53.tinypic.com/erx10l.jpg
http://i55.tinypic.com/2iuezxc.jpg


Kynar wire for SMD, small wire with a very small hole under the drive :

http://i55.tinypic.com/5bagk8.jpg

[Chiller]

Vote for me : http://www.maxishine.com.au/forums/viewtopic.php?f=11&t=14223&start=0

[Chiller]

Little update,

tomorrow big works on rig :

http://i56.tinypic.com/15eu6vc.jpg

http://i53.tinypic.com/2whf4ty.jpg

http://i56.tinypic.com/aafzps.jpg

http://i52.tinypic.com/a1mlq8.jpg

[rdrash]

coming along very nicely man :)

[Chiller]

thanks

[TiN]

amazed how patient you are. I could never wait sooooo loooong to turn that rig on :D

[Chiller]

pantience will always be rewarded no ? :)

[Chiller]

little update :

Coolingpaste is used : Liquid Ultra,
temp sensor by every cpu,
Adjust the mounting with red smoke acryl voor more pressure on armaflex and for visual effects,
start to cut also some tubing Norprene on size,

only waiting for next orders to arrive of tube clamps, 3mm red led's, and some more stuff.
The first triple kit memory is also ordered : Corsair Dominator GT 12Gb triple kit 2000Mhz CL9,
where there will come 4 kits on the mobo of these.

enjoy the pics :

http://i56.tinypic.com/2elxnk7.jpg

http://i52.tinypic.com/97lmw9.jpg

http://i55.tinypic.com/111ugly.jpg

http://i54.tinypic.com/33os6sw.jpg

[Chiller]

here some show pics,the effect of the custom mounting is now nice visible,
while i'm busy with all the cable management :

http://i51.tinypic.com/fyock1.jpg

http://i53.tinypic.com/x3en0l.jpg

http://i52.tinypic.com/2i9ijxf.jpg

http://i52.tinypic.com/bdkzh3.jpg

[Chiller]

http://www.youtube.com/watch?v=3LLuWvRMKQs

[Chiller]

small update:


tubing is almost ready just need 3th pump, a koolance PMP-400 with acetal top,

and building a drainvavle beneath.

then it's all ready just need memory dom GT 2000Mhz 12gb Triple kits.

enjoy the pics because it's closing up this build, just few mods and it's ready :


http://i51.tinypic.com/2s1u1oy.jpg

http://i51.tinypic.com/2lsd1jm.jpg

http://i55.tinypic.com/2415nhz.jpg

http://i56.tinypic.com/23uvr6a.jpg

http://i53.tinypic.com/2ytu3d1.jpg

http://i51.tinypic.com/2e0jwjl.jpg

http://i53.tinypic.com/29ql644.jpg

http://i55.tinypic.com/2071gl0.jpg

http://i53.tinypic.com/2uqkjkn.jpg

[Chiller]

http://www.youtube.com/watch?v=V-csoxDXp_0

[Chiller]

little teaser, what am i planning to do ?

http://i53.tinypic.com/vwtslx.jpg

[Chiller]

the bottom is as good as finished,
just need to order a flat pump with top...
if a Koolanc PMP-400 pump with top is maximum 40mm heigh.

I can take the bottom out any time it's a tight fit and is on 2 alu plates, nice and steady.

The usb internal, sata and ECP connector on the mobo is nice clean now.
This is no metal plate but 4mm not shiny black acryl plate PMMA15

only needs to get connectors for the PciE powercables for the GPU's :

http://i52.tinypic.com/2cqmcfd.jpg

http://i55.tinypic.com/1okm55.jpg

http://i52.tinypic.com/znadeg.jpg

[Canis-X]

Looks really good man!! What else needs to be done to it before you can power it on?

[Chiller]

after the drain valve needs also a exit for the liquid :

http://i54.tinypic.com/5ewkg2.jpg

[TiN]

Endless build :D If only not red, i could love that maybe :D

SR-4 for sandybridge may come up earlier than this monsta finished :-D

j/k

[Chiller]

if SB SR-4 or something may show up, i build one also with that for my girlfriend lol ;)

[steponz]

Very nice chill, sb 4 CPU monster would be sick ... Still waiting for you to finish up and send me this rig.... Rofl........

[Chiller]

for 24/7 rig i'm happy with this one.

give it to you ?? Let's think...........

HELL no hahahahahaha ;)

SB needs to come also in the house and test several retail chips for a good one.
What is the best mobo untill now for SB actually ?

SB 4 cpu mobo ? think that will take some while before that comes out no ?

[steponz]

So far Asus looks good, but don't have a board to test for them..

I tested the new MSI bios.. and its pretty screaming..

Good enough for no 1. cpuz at the moment.. Much more left in her..

http://hwbot.org/community/submission/2109853_

Gigabyte board is also very good, need to try the latest bios.. since the last one wouldn't run single core properly...

Come on man... send that beaut to my house... lol.... You know you want too... lol

[Chiller]

you got PM.

i will look all the results for a good mobo, otherwise i need to try also different mobo's for SB and different chips£.

[Chiller]

little update :

Make the led's for the full cover block on size to the fan connector on mobo what normally the fan is for the NB cooling.
Next i'm modding the powercables for the vga's :

http://i55.tinypic.com/34jcbk4.jpg
http://i54.tinypic.com/ojqmtj.jpg

[Chiller]

i'm busy on a little mod for the memory, lasered alu, and some handwork, need base and color paint :

http://i52.tinypic.com/23mq2yv.jpg

http://i53.tinypic.com/2q0sp4g.jpg

[Chiller]

new pic

http://i56.tinypic.com/a1slfp.jpg

[Chiller]

better pic of GT mod :

http://i53.tinypic.com/nzreph.jpg

and new stuff sponsort by aquatuning :

http://i54.tinypic.com/2pqq068.jpg

[Chiller]

today had some fun to make some more Dominator GT flames for my memory :

http://i51.tinypic.com/212e0sx.jpg

[Chiller]

update :

http://i51.tinypic.com/dqsksz.jpg

[TiN]

Evil memory :)
What is ETA of project ? :D

[Chiller]

when i find sponsor for vga and hdd, then it's finished lol ;)

[Chiller]

small update, got at last the snake connector in, so the 3th pump can be fitted and the loop closed,
ready to fill it up.

left of the pump you see all kind of cables , that's for the Koolanc TMS-200 controller, all kinds of temp sensors all around the mobo and cpu's.

http://i54.tinypic.com/4toa69.jpg

[Chiller]

i'm going to fill up the loop now the 3th pump is installed, own mixture : 25% Ethylene Glycol and 75% PURE water, no demi.

what you see in the measure cup is the Glycol no color pure 100% glycol :

http://i55.tinypic.com/54zmth.jpg

here my koolanc poor in cup on the ZERN res with a snake connector to make it a little bit eassier to fill :

http://i51.tinypic.com/5mwk82.jpg

on the drain valve i putted also a tube in a bus filled with my mixture, where the pump can draw it's liquid from when i put the valve open, to make it a little bit eassier to lol :

http://i52.tinypic.com/35d8gw9.jpg

http://i54.tinypic.com/2zgheld.jpg

and here comes the first liquid lol, pumps are now running to get the last micro bubbles out the loop, for now, no leaks found :

http://i55.tinypic.com/2r4n18p.jpg

[Chiller]

http://www.youtube.com/watch?v=vWzQnCi-d-I

[Chiller]

It's a miracle !!!!

i get it closed hahahahaha, +200m cable in limited room of 3,5cm lol :

http://i55.tinypic.com/avhdmp.jpg

here you see that the plate is a little round, but i put the cable fast fast in to look if i get it closed,
later on the cable will be nice routed and strapped so that the plate doesn't look round :

http://i55.tinypic.com/2pr8pz9.jpg

[Chiller]

last minute adjustment for the vga's :

http://i54.tinypic.com/jhyakj.jpg

http://i54.tinypic.com/29q1f8p.jpg

[Chiller]

little update :

http://i52.tinypic.com/30arh5l.jpg

http://i56.tinypic.com/b8sidv.jpg

http://i52.tinypic.com/2ldd2ts.jpg

[Chiller]

here an update of my temps with OC :

http://i56.tinypic.com/2ez19wi.jpg

[Chiller]

here are the load temps, cpu temp in Coolit software is not correct, cpu isn't supported by the coolit software.

As you see idle the coolers run lower power, when stressed the coolers will raise there cooling power, and keep the liquid temp low, under Ambient,
cpu temp raises a 5 a 6°C from idle to load thanks to temp controlled coolers.

Temp of liquid is set @ 22°C max, min power of coolers @ 60%, max power @ 100%, real nice settings on these coolers,
and the coolers don't even run at 100% to keep the temp, for me that's good for lower noise level :

http://i56.tinypic.com/2lm5l50.jpg

[Chiller]

little sneakpeak what i'm doing now :

Most of the time, people put there powercable for vga like the RED arrows.
I whant it as clean as possible in this case, en i will do my powercables like the GREEN arrow, straight horizontal with the vga's.
Vga's seems like they are floating in the air lol, strange sight.

On later time i can mod also the plastic cap on the vga, make it wider, little bit bigger, so the powercables are IN the plastic cap of the vga cooler, totally NOT visible.

http://i56.tinypic.com/30981f6.jpg

And this is the beginning of this little vga mod :

http://i54.tinypic.com/34fjt04.jpg

[Chiller]

Am working now on the last mem flames, did the cables in the backpanel better now, so the back-panel is not round anymore,
and made some led's for give light to the mem modules :

http://i56.tinypic.com/2i0pwkn.jpg

http://i55.tinypic.com/snl4ig.jpg

http://i54.tinypic.com/3136t7l.jpg

http://i53.tinypic.com/2qxpz88.jpg

[Chiller]

Killer2100 is finally in the house,
original cover removed for modding it,
and here a pic of the killer2100 in operation with two red led's, what fits very good in the theme :

http://i54.tinypic.com/5pemtt.jpg

[Chiller]

Got a new sponsor, he send me already a nice package ;D

Thanks to Eddy of IT-Service (http://it-service.be)

http://i56.tinypic.com/14w6oli.jpg

Nice and good packed, and a triple sli connector also ?

There is already 1 can of Dr Pepper gone, girlfriend grabbed it !!! :o
http://i56.tinypic.com/32zi2hl.jpg

There was no Triple SLI connector in that box, but nice GOODY's !!!! :P

http://i54.tinypic.com/vgld7t.jpg

Directly also cleaned the Pc room, and make the desk clear of any garbage and screws :

http://i51.tinypic.com/2wd84dd.jpg

The second mem kit of 12Gb 2000Mhz GT's got already new cooling fins of my own creation,
there are more happy now with the new ones ;) .

http://i55.tinypic.com/m7awzq.jpg

the lowest modules have a red led on them for in the dark, but gives by day a different color,
but you can be shure, they have the same red, also the flashlight extra on it.......
http://i56.tinypic.com/mbi939.jpg

[Chiller]

Got a new toy in the house, and tried to make nice pics of that 960Gb monsta and some nice pics in my case :

http://i53.tinypic.com/1o40v6.jpg

http://i55.tinypic.com/2my23bp.jpg

http://i53.tinypic.com/fnxzlj.jpg

http://i52.tinypic.com/2cf9ph4.jpg

http://i56.tinypic.com/x6j0qh.jpg

http://i56.tinypic.com/2q03ok2.jpg

http://i56.tinypic.com/2iw6ag7.jpg

http://i51.tinypic.com/258ml8o.jpg

http://i55.tinypic.com/34zkt5l.jpg

http://i56.tinypic.com/359fdye.jpg

http://i51.tinypic.com/302mhqr.jpg

[XtremeCuztoms]

That's sick bra
Very nice

[Chiller]

thanks

[Chiller]

http://www.youtube.com/watch?v=vn-XeYLtuSg

[Canis-X]

So is it all done now?

[Chiller]

nope, just need Evga Classified GTX590's for this rig and for benching ln².

then it's finished

[Chiller]

There's a new baby coming to me, a Evga GTX285 Classified 1Gb vga, just for PhysX in my rig :

http://i39.tinypic.com/352m0yg.jpg

http://i43.tinypic.com/xoegq1.jpg

then i will have all Classified stuf in it :

SR-2 Classified mobo
2x GTX580 Classified for FPS
SR-2 1200w Classified Psu
and the gtx285 Classified for PhysX

http://i56.tinypic.com/28c0hs1.jpg

[GeneralDeath]

Those Flames as heat sinks on the ram modules are fully fully sick chiller and love the red blending just awesome.

[Chiller]

thanks,

will post new pics of complete rig when it's completly finished

[Chiller]

Last stuf making for vga's, making 5 more of these, cut them on lenght, other side also connectors,
isolate them, make them black :

http://i40.tinypic.com/2by62o.jpg

http://i41.tinypic.com/161yusl.jpg

[Chiller]

like this the connectors will be :

http://i43.tinypic.com/wa3x3s.jpg

each vga 2 connectors, but behind each pair there are 3x 12v rails.
So vga's will get enough power
(and made shure the cables are not to tin for that power transfer)

http://i40.tinypic.com/23sdrol.jpg

only those bars need to come at the same hight as the connectors on vga's, so need some curves to get that
(don't mind the dust lol) :

http://i40.tinypic.com/261fbbb.jpg

[Chiller]

gtx580 Classified backplates are in the house, the gpu's getting spoiled:

http://i39.tinypic.com/2iqzbmf.jpg

hhhmmm sexy :

http://i44.tinypic.com/w1zn1v.jpg

[Chiller]

update, first is allmost finished, need some detail work done, and made black, but it works like a sharm and no cables there anymore :


http://i44.tinypic.com/96e1a9.jpg

http://i39.tinypic.com/fm3rix.jpg

http://i39.tinypic.com/2hxx8v9.jpg

http://i39.tinypic.com/2vxq7he.jpg

[Halo_003]

Wow that is sweet, hopefully the last card will arrive soon.

[Bobnova]

That's absolutely glorious. Hard rails for the PCIe power is something I certainly wouldn't have thought of.

Is the PSU external, or do the wires go out the back and then come back in the back?

[Chiller]

psu's are internal.

[Halo_003]

285 Classified spotted in Belgium! :O

[Chiller]

in the customs office lol, that they send it fast tru

[Chiller]

Little update : Next copper bars are bended the same and almost on the good lenght, and 2 PciE connectors are almost ready to :

http://i40.tinypic.com/20jljjk.jpg

[Chiller]

Small update :

http://i43.tinypic.com/121wvhc.jpg

http://i40.tinypic.com/2im01ds.jpg

[hokiealumnus]

Those rails are awesome Chiller, very inventive and cleanly done. Great work!

[Chiller]

thanks

[Hondacity]

i'd love to see some welding done with those prongs lol

i did abit of welding myself on some fan cables, fan cables gone wrong lol

[Chiller]

i'd love to see some welding done with those prongs lol

i did abit of welding myself on some fan cables, fan cables gone wrong lol

what you mean, you whant to see some welding done with those prongs ?? :o

How did you get you're fan cables f***** up honda ???

[Chiller]

little update, needs some finishing off, thirth vga adding for PhysX, bodem plate placing in, and remove dust :

http://i41.tinypic.com/2upeotf.jpg

http://i39.tinypic.com/34ef4mp.jpg

[Chiller]

some pics of extra PhysX vga that arrived,

some adjustment on fan, fan did make noise above 80%, fixed
New cooling paste on GPU = Evga Frostbite, fixed
New thermal pads better conductivity, fixed
Cleaned out, fixed

http://i39.tinypic.com/3517ax1.jpg

http://i42.tinypic.com/34g4nqc.jpg

http://i43.tinypic.com/z7ts.jpg

http://i42.tinypic.com/2uenuvd.jpg

[Chiller]

http://i42.tinypic.com/10mllkg.jpg

http://i41.tinypic.com/2cg287d.jpg

http://i41.tinypic.com/2evqhxw.jpg

[Chiller]

some small adjustments in rig,
so really everything is how i whant it :

this res comes in place of the top Coolit pump,
and the one under it will be changed by a koolance PMP-400 :

Bitspower Z-Multi 40mm Water Tank - Ice Red
http://i44.tinypic.com/33u4t29.jpg

also will ad a fan red led in bottom plate for some extra air for vga's.
ad some small red smoke acryl plates for finishing overal look when case is open to hide cables.

And then it's really finished like i whant it !

[Chiller]

some pics of extra vga that arrived,

some adjustment on fan, fan did make noise above 80%, fixed
New cooling paste on GPU = Evga Frostbite, fixed
New thermal pads better conductivity, fixed
Cleaned out, fixed

http://i39.tinypic.com/3517ax1.jpg

http://i42.tinypic.com/34g4nqc.jpg

http://i43.tinypic.com/z7ts.jpg

http://i42.tinypic.com/2uenuvd.jpg

[Halo_003]

Glad to see it finally got there, how'd you fix the fan?

[Chiller]

it hitted metal and started vibrating, little armaflex tape between it and hopsa

[Chiller]

Removed the two Coolit pumps and replaced them with :

Swiftech MCP355
Aquacomputer top
koolance heatsink
Bitspower Z-multi red 40mm res

Temps are little lower now, higher flow.

Just need to make a nice mounting for the pump res combo (strapped for now) ,
make a fan in the bottom and finishing some stuff of cables and red acyl.

http://i42.tinypic.com/1z39kw4.jpg

[Halo_003]

Hey, please check your PM box, I'm still waiting on the stuff from our trade and it's been like 9 weeks now with no arrivals.

[Chiller]

send you PM

[samarlian]

thats one hell of a rig man :-)

[Halo_003]

Sent another PM.