te9 mounts 295 single pcb

[bazx]

hi vince

do you stock

te9 mounts 295 single pcb

thanks baz

[k|ngp|n]

Well, there is some really bad news baz :( The single pcb 295 will require diff units I'm afraid man. I have been working on them for about 3 months already as they are COMPLETELY different that anything I have ever made or anyone else for that matter in terms of gpu unit design/construction.
I tried to make the 5.0 fit this card, but there are some major roadblocks like sli connectors, power plugs that are in the way. The only way to make it work is to put some kind of extension plate on the unit so it push the container far out from the card, but I am really uncertain about how much that would screw up the temps and the sli bridge is still very much in the way for two card operation.

[bazx]

just my luck i am trying to mount 4x pots now and i see exactly what you are saying

life is never easy

i will have to get something worked out

thanks any ho vince

[DrNip]

Man this sux as I was thinking of getting two tec 9's for mine.

[bazx]

i have managed to get the tek 9s on the card now

however i have had to remove the power "in" plugs to the rear of the card

and make up some new mount brakets i will put up some images later

[bazx]

http://www.benchtec.co.uk/images/baz/msi/tekmounts/P1000964.jpg

http://www.benchtec.co.uk/images/baz/msi/tekmounts/P1000969.jpg

as you can see the sli connector is now blocked so needs a new bridge connector to be made up

http://www.benchtec.co.uk/images/baz/msi/tekmounts/P1000971.jpg

[Oj0]

Got enough vmods?:eek:

[Gunslinger]

:pcool: hiproesque mods there. Well done.

[bazx]

the sli bridge

http://www.benchtec.co.uk/images/baz/msi/vmods/P1000974.jpg


@Gunslinger the vmods are not my work but one of our benchteam persivor i only moved the power plugs to get the pots on

[DrNip]

Holy Lody look at that mod!!!!

[k|ngp|n]

That is bad-ass man! That is exactly what you need to do to make them fit that single pcb 295, and you did it! Most guys wont go through all that trouble, so that why the new revs.

[Deanzo]

Be it yours or your team mates,

Killer mods baz!

[bazx]

hehe dean they did not work as intended more like an auto shut down

but i live in hope we can fix them:D

@ vince i had looked forward to using the tek 9 so much that i was always going to get them on one way or another :)

but you are right it would have been much better to have the new rev

[Kal-EL]

bazx thats some really amazing work man, kudos.

[MaadDaawg]

nice - clean work there ... sure is purty :)

[Gatman]

Now that's determination

[bazx]

just getting ready for another go

vid mod this time and maybe ocp mod just have to see how this works out
this mod has been done by EvOcarlos

i have just been building a cpu 410a single stage (temps around -55) to bench a 870 on p55 GD80 which will give me a little more time to enjoy the benching

the cards will be back on pots

heres a shot of carls mod

http://www.benchtec.co.uk/images/baz/msi/vmods/17092009529.jpg

[Karmakazi]

beautiful work :clap:

[sofos1990]

Nice work at all:D
But how many mods are there?lolp:p

[ibm390s]

only one mod for gpu vcore and measure points for both gpu's. since the controller is ADP3193A (http://www.analog.com/static/imported-files/data_sheets/ADP3193A.pdf) from Analog Devices, it's easy to set the desired voltages using dip switches for for vid map.