Need zombie? Make yourself, some help arrive here

[e-Killer]

Thread index []

It's time to bring topic for Zombie-:\:\:\:\:\.

Frankenshteins, zombies, half-life in videocard and motherboard :\:\:\:\:\.

All please post here.

Welcome our fellow Nectomants and their creatures:

Shamino (with custom designs

9800GX2 + motherboard CPU VRM (i guess only GPU power ?)



EVGA GeForce GTX 480 + EVGA Untoucables (GPU and MEM powered)



Sham and Nickshih

GeForce GTX 580 + GTX 480 VRM (only memory powered)



Hipro5 (with his own design FTW)

GeForce GTX 295 bi-PCB + Dual VGA maximizer of own George's design. ( guess GPU power)



Hipro's VGA maximizers



TiN

GeForce 7800GTX 256MB with Radeon 4850 VRM (GPU + MEM power)



GeForce 9500GT with Radeon 4850 VRM (GPU + MEM power)



GeForce 8600GT with Radeon 4850 VRM (GPU + MEM power)



GeForce GTX 285 with EVGA Untouchables (GPU + MEM power)



GeForce GTX 285 with Radeon 4870X2 VRM (GPU + MEM power)



If you believe that you should be listed here (or lack of your zombies) - PM TiN with your zombie details

* Mod request #0002
* Videocard
* MSI GTX480 Lightning
* Mod the PWM from this VGA to use as vga maximizer. (the card is artifacting, so will be good to use this strong PWM for other cards)

[Hondacity]

wooot nice stuff...so who's enrolled? any timeframe for this semester?

[TiN]

We are open .

Timeframe - as soon as pupils do their homework :-D

[e-Killer]

Ok i ill mod my 480 lightning~ i hope post it as soon i can, ill test first with 8800gt

[Shammy]

hey tin have you tried the following:

leaving on some inductors on VGA pad side to help reduce effect of wire length

parallel power (worked for a while but burnt up mosfets once and didnt wanna try again)

[TiN]

Did that with volterra VRMs.

Actually it is shown on photo above.

Paralleled two Volterra-based (1165MF + 3Ø 1195SF's on each). Worked ok for few days (didn't tested more). Interconnected Vout from inductors with AWG8 wire (you see that on photo). Feedback left native. It was 4870X2 power VRM.

[Cyph3r_Smurf]

I have made this first part. But i'm not at home for the next few weeks. Didn't got a picture of it, so you have to wait

[Gomeler]

I have a few dead G92 cards and a HD3850 with a dying/dead memory IC. Tonight I'm going to mod the HD3850 to power it up separately. All I need is +3.3v fed to the PWM IC, right?

edit: and of course +12vdc to actually step down through the mosfets

[TiN]

All you need is to put +3.3v and +12V base from PCI-E socket and push VR_enable if any on PWMs.

[Quake]

And what about this?



If we cut the PCB, how we make it to run? Only power it through PCI-E connector or? And how we push VR_enable?