Modification request thread. Need mod? Ask here!

[Chiller]

adding 12v to 12v lines on vga is good when not using zombie

[crio]

Mod request #0023
[ *]Which hardware do you need to mod? VGA.
[ *]Hardware model label? Small VGAs - 3850
[ *]What do you need? Zombie
[ *]What VRM controller does your hardware run? UP6101
[ *]What is stock voltage of VRM output / OCP/OVP trip point? -

Got a quick question for you TiN

Can I use 3850-3870 as power suply for smaller cards with no extra power?
If so, can you explain tha way to do that (similar way with the 2900xt but i dont have one of these,)

[Chiller]

Originally Posted by crio

Mod request #0023
[ *]Which hardware do you need to mod? VGA.
[ *]Hardware model label? Small VGAs - 3850
[ *]What do you need? Zombie
[ *]What VRM controller does your hardware run? UP6101 See pic
[ *]What is stock voltage of VRM output stock voltage you have to measure it on certain points on vga when running, post pic for that of pcb / OCP/OVP trip point? - Test it first what MAX is with Vmod
Got a quick question for you TiN

Can I use 3850-3870 as power suply for smaller cards with no extra power?
If so, can you explain tha way to do that (similar way with the 2900xt but i dont have one of these,) you can use all VRM of vga's that are more powerfull then the vga where you whant to use on it, look at the number of Phases

[crio]

Chiller i know the mods for 3870/50.
I just want to know if i can turn it into a zombie to power sime very small vgas i have (like a 9500gt etc)
and if i can then how to do it.

[Chiller]

VRM of any vga you can use as zombie, but will it have more benefit to put a 3850/3870 VRM on other vga?

I think it's 4 Phase no?

[TiN]

No, it's 2 phase doubled.
It will not benefit if put it on anything except lowend.

[crio]

What about 4850?

[Chiller]

i got a 4850 with 4phase gpu and 2 phase mem.

And i did not needed for Zombie for more power, Vmod did already +1000Mhz gpu :

http://hwbot.org/submission/2226495_...r3_70928_marks

http://hwbot.org/submission/2226496_...r3_39237_marks

[crio]

You still havent understood what i mean...

I want to use one of these Ati cards (3850/70-4850/70) as a power supply for older or lowend cards. For example 7300gs - 7600gs....

Is it possible?

[Chiller]

yes it's possible