kingpincooling.com

Go Back   kingpincooling.com > Overclocking & Benching > Shamino's Lair...

Shamino's Lair... The one, the only, the master; Shamino...

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 04-26-2012, 05:49 AM
Shammy Shammy is offline
Liquid Nitrogen
 
Join Date: Aug 2009
Posts: 867
Default make her cold bug

they were right about non soldered TIM



temps are not as good with IHS without exertion of force by ILM on the core but with good thermal paste and remounted IHS, temps are better and may bring the CPU to cold bug
Reply With Quote
  #2  
Old 04-26-2012, 06:22 AM
Pt1t Pt1t is offline
Ambient
 
Join Date: Sep 2009
Posts: 44
Default



They used all the picture of my dead cpu !!!

http://wd.ch-img.com/1233141-ivydie.jpg

BTW what thermal paste you use to remount it ?

Last edited by Pt1t; 04-26-2012 at 06:24 AM.
Reply With Quote
  #3  
Old 04-26-2012, 08:29 AM
hokiealumnus's Avatar
hokiealumnus hokiealumnus is offline
Sub-Zero
 
Join Date: Nov 2010
Posts: 166
Default

Yes, we did; thanks for letting him use that Pt1t!

Thanks as well for the confirmation Shammy.
Reply With Quote
  #4  
Old 04-26-2012, 08:38 AM
Shammy Shammy is offline
Liquid Nitrogen
 
Join Date: Aug 2009
Posts: 867
Default

Quote:
Originally Posted by Pt1t View Post


They used all the picture of my dead cpu !!!

http://wd.ch-img.com/1233141-ivydie.jpg

BTW what thermal paste you use to remount it ?
i think its either u use something thick like gelid or file down the IHS feet to lower it and go with something thin
Reply With Quote
  #5  
Old 04-26-2012, 08:56 AM
ME4ME ME4ME is offline
Sub-Ambient
 
Join Date: Dec 2010
Posts: 54
Default

any gain in CPU clock?
Reply With Quote
  #6  
Old 04-26-2012, 09:02 AM
evangelionstar evangelionstar is offline
Ambient
 
Join Date: Apr 2012
Posts: 1
Default

Shammy:

Is that a Retail ivy? ie final product?

How much improvement in thermals did you notice by using a different paste?

How much improvement in clocks?

Did you try abandoning the IHS completely and seating a cpu heatsink directly on it?


thanks
Reply With Quote
  #7  
Old 04-26-2012, 09:57 AM
OBR_CZ OBR_CZ is offline
Ambient
 
Join Date: Jun 2011
Posts: 34
Default

this is not new! sandy Bridge/nehalem is not soldered too! Alle CPUs from Intel few years ago are with TIM, not soldered!

sandy Bridge datasheet: http://www.intel.com/content/dam/doc...cket-guide.pdf

ivy bridge datasheet: http://www.intel.com/content/dam/www...cket-guide.pdf

all has TIM between IHS/Core
Reply With Quote
  #8  
Old 04-26-2012, 10:04 AM
hokiealumnus's Avatar
hokiealumnus hokiealumnus is offline
Sub-Zero
 
Join Date: Nov 2010
Posts: 166
Default

TIM can just as well be Solder OBR. Thermal Interface Material does not exclusively mean paste. Solder is a thermal interface material between the die and IHS. Here is a de-lidded, soldered 2500K. (Initial post, request for pic, post w/ pic.)

EDIT - Here's an i7 965 with the die ripped off by solder too.

Last edited by hokiealumnus; 04-26-2012 at 10:07 AM.
Reply With Quote
  #9  
Old 04-26-2012, 10:05 AM
0skill's Avatar
0skill 0skill is offline
Sub-Zero
 
Join Date: Jan 2011
Posts: 123
Default

This TIM or thermal interface material
is this some kind of thermal glue?
Reply With Quote
  #10  
Old 04-26-2012, 10:23 AM
OBR_CZ OBR_CZ is offline
Ambient
 
Join Date: Jun 2011
Posts: 34
Default

Quote:
Originally Posted by hokiealumnus View Post
TIM can just as well be Solder OBR. Thermal Interface Material does not exclusively mean paste. Solder is a thermal interface material between the die and IHS. Here is a de-lidded, soldered 2500K. (Initial post, request for pic, post w/ pic.)

EDIT - Here's an i7 965 with the die ripped off by solder too.
Look at Intel datasheets, SNB-E has TIM too ... but Westmere Xeon not, there is different picture a material described (they are soldered). I have somewhere naked photo of Ci7-980 with classic paste not soldered + the same for core 2 quad ...
PS. soldering is cheaper then this found TIM in Ivy Bridge ...
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:05 AM.

Contact Us - www.kingpincooling.com - Archive - Top
Powered by vBulletin® Version 3.8.3 Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.