Sneak peek at EVGA's new dual socket 2011 motherboard. SR-?? :)

[TiN]

Ensure your evaporators and system can hold high loading

[movieman]

Originally Posted by Gatman

Movieman's wet dream right here

Did I hear my name mentioned and your 100000% right..
Darn, there goes another pair of pants!
Looks around the house:
Case..check
PSU: check
Monster WC system for these volcano's: check
Memory: Ok, need 2 more sticks
Not sure if this is appropriate for here but anyone got 2- 2 gig Corsair GTX1's collecting dust?

[Gunslinger]

I don't have any GTX1's but found some on EBay.

http://www.ebay.com/itm/Corsair-Domi...item336fba934f

[Hyperhorn]

I've gone through the online documentation and noticed EVGA doesn't promote the SR-X for overclocking in any way, SR-X is for "extreme power users, workstations, server admins and folder/crunchers" only. So I guess
- no OC via multiplier
- no OC via straps?

In case that's true (haven't noticed any OC results or official word about the Xeon OC features yet, so very likely they don't exist), that would suck pretty hard. I know it's not EVGA's fault, but Intel's decision, but DAMN ...

However maybe I will find out by myself very soon.

[hokiealumnus]

Sorry to say at this point, there is no OC'ing: http://www.evga.com/forums/tm.aspx?h...page=1#1485672

[EeKy NoX]

Originally Posted by Hyperhorn

- no OC via multiplier
- no OC via straps?

OC via pinmod

[streetmobo]

Hi
I have a SRX 2 8c 3ghz ES
no boot just code 19 , this code not listed in code list EVGA
I have tried some dim's and GPU no result
the cpu's tested with classified X79 and RE4 is OK
gpu and dim always tested on X79 OK
if you have issue to search the solution

thank for your reply

[TiN]

Did you tried obvious things, like remove AC power, clear CMOS, try different BIOS switch position, etc?

[streetmobo]

Hi TIN
thank for your interest at my case
I have tried the 3 bios same code 19
tried I7 3820 code 00
tried large panel of dim's same issue
tried some GPU no result
tried others psu
all devices tested on my classified X79 and is ok

you have other idea

normaly evga have flashing bios before sending in europe
same to USA , possible bad flash ?

[TiN]

Maybe, you can try to put X79 bios and test with CPU0 (3820) to check if board works.
Use socket with 8 DIMM slots for test

If not boot even with X79 BIOS than suggest RMA