Maximus 4 Extreme BIOSes

[safedisk]

Originally Posted by Shammy

your Management engine module of the current bios rom seems to be screwed up. flip over to the second bios rom on the mobo

Used as the second BIOS chip, fine. Bclk was normally set
However, I apply a second BIOS chip Q_RESET button
Have the same problem as before. Please let us know how to fix.

[3oh6]

Originally Posted by safedisk

However, I apply a second BIOS chip Q_RESET button

stop hitting Q_RESET.

[Quake]

Hey guys, how do you achieve 2133MHz on this board?

I tried everything,stoped at CPU 1.5v, VCCIO 1.25v, VCCSA 1.05, DRAM 1.775. Tried every possible setting, but nothing. Latency was 8-8-8-21-1T

I can run 2133 with 4.5 CPU, but at 5GHz it is no go. Also, on UD7 2133 7-7-6 is no problem

HT off, 4 cores. Running gpu via NF200 and memory is dominator gt v2.1 2000mhz (2260 @ 1.65 on x58 platform)

[Hondacity]

try dropping vpll

[Quake]

Tried that also, 1.7v but nothing

EDIT:

I tried with PSC, 2180 6-9-6 is no problem with them at 5GHz. So there is a problem with hypers and board

[Shammy]

Originally Posted by Quake

Tried that also, 1.7v but nothing

EDIT:

I tried with PSC, 2180 6-9-6 is no problem with them at 5GHz. So there is a problem with hypers and board

were u using the closer dimms to cpu and not the red slots? the hypers i tried clock fine on the red slots, they do worse on the black.


New bios 1092:
http://www.mediafire.com/?ryapxicqo45q5e8

Shows CPU Target frequency at boot

[Quake]

I was using red slots.

On 4.5GHz, 2133 is no problem. I can run Linx all day long, but on 5GHz I can't even get a loop of 8M or 32M and I can only dream about it on 5.4GHz

Will try 1092 in a few hours

EDIT:

Tried new bios, situation is even worse... I can't even get it to boot on 2133MHz, always get 58 code

[Hazzan]

Originally Posted by Quake

I was using red slots.

On 4.5GHz, 2133 is no problem. I can run Linx all day long, but on 5GHz I can't even get a loop of 8M or 32M and I can only dream about it on 5.4GHz

Will try 1092 in a few hours

EDIT:

Tried new bios, situation is even worse... I can't even get it to boot on 2133MHz, always get 58 code

what your cooling ? I think you need better cooling in diveder 2133 with high clock..but depend your chip..

[Quake]

On air. I haven't mention, on UD7, I can run 2133MHz, even further like 2180 7-7-6, on air with no problems and with the same CPU and same condition regarding the temperatures

[abbath]

BLINKING CURSOR WHITE ON THE LEFT TOP

I'm in OC to 4.6 GHz fully stable at 1.28V.
but randomly, before booting the debug led shows me the error AE, does not always happen, but it's really irritating! I tried with other ram same thing, I tried another hd same, why?! how can I fix it?! help me please

So let's start with the configuration

asus maximus extreme iv
intel i7 2600k
8GB Corsair Vengeance 1866 (the same event for the GSKILL ECO)
ati hd 5850
intel x25m g2 80gb (same event with the WD VELOCIRAPTOR)
maxtor 500gb
asus dvd-rw (I also tried to disconnect but the event is the same)
psu seasonic m12d 750w
I am at 4600mhz, the system is stable at 1.28 V, I heavily tested with prime95 64bit for more 'than 10 hours

"Extreme Tweaker TAB:

CPU Level Up: AUTO
OVERCLOCKING TUNER: XMP
TURBO RATIO: ALL CORE MODE
TURBO SETTING MAXIMUM RATIO: 46
INTERNAL OVERVOLTAGE PLL: AUTO
MEMORY FREQUENCY 1866
EPU POWER SAVING MODE DISABLED
CPU PERFORMANCE SETTINGS: everything is DEFAULT
DIGI + VRM / POWER CONTROL: ALL FOR DEFAULT (I HAVE JUST TOUCHED VCORE LLC is set at 25% AND OPTIMIZED TO PHASE CONTROL)
EXTREME OV: DISABLED
CPU VOLTAGE: OFFSET MODE
OFFSET MODE SIGN: -
CPU OFFSET VOLTAGE: 0.005
DRAM Voltage: 1.50 BY XMP

THE REST OF THE TAB EXTREME TWEAKING IS ALL SET UP TO AUTO


"ADVANCED TAB"

CPU CONFIGURATION TAB:
CPU RATIO AUTO
IATM: DISABLED
HT: ENABLED
ACTIVE CORE PROCESSOR: ALL
MAXIMUM LIMIT CPUID: DISABLED
EIST: ENABLED
TURBO MODE: ENABLED
CPU C1E: ENABLED
C3 CPU REPORT: ENABLED
CPU C6 REPORT: ENABLED

PCH CONFIGURATION: Untouched
SATA Configuration: AHCI
USB CONFIGURATION: Untouched
ONBOARD DEVICE CONFIGURATION: I disabled the JMicron controller, the Marvell MOVED UP TO IDE DVD-RW

"MONITOR TAB" Untouched

"" BOOT TAB ""

BOOT NUMLOCK STATE: ON
FULL SCREEN LOGO: DISABLED
POST REPORT: 1 SEC
OPTION ROM MESSAGES: Force BIOS
SETUP MODE: ADVANCED MODE
WAIT FOR 'F1' IF ERROR: ENABLED

BOOT OPTION PRIORITIES
BOOT OPTION # 1: Intel SSD
BOOT OPTION # 2 DISABLED


BOOT OVERRIDE
P1: INTEL SSDSA2M080G2GC
P2: MAXTOR STM3500032AS
P3: AOSO ASUS DRW-2014L1T

HARD DRIVE BBS PRIORITIES:
BOOT OPTION 1: Intel SSD
BOOT OPTION 2: MAXTOR STM3500032AS

CD DVD ROM DRIVE BBS PRIORITIES:
AOSO ASUS DRW-2014L1T

i get sometimes error B2,and the damned AE,help me PLEASE!