Maximus V Formula

[Splave]

I was thinking something with a bit more mass though

[Raja@ASUS]

Shambo uses a GPU pot balanced on top of the heatspreaders.

[K404]

Here was my attempt at cold RAM. Did it work? Not really. Was it cold enough to kill the board? Why, yes. Yes it was. My insulation wasn't as good as I thought

[Dumo]

Found another use for venom pot..
base is not wide enough, but its kinda work. Still waiting for my pot

[hiwa]

you want to see how crazy is M5F? look at this board after 6 hours mem benching, i was tired to bench but seems board want to continue again....





Highest Bandwidth we ever seen right? the crazy TridentX 2800CL11 with hynix ICs TIGHT timings, look at that READ

[Splave]

Originally Posted by K404

Here was my attempt at cold RAM. Did it work? Not really. Was it cold enough to kill the board? Why, yes. Yes it was. My insulation wasn't as good as I thought

Respect.


going to rig something today, will post results

EDIT:

froze some mem for XS 5ghz challenge, was pretty fun!





^LMAO gemini turbo lol would not recomend took full pot to get mems to -40c then I had to pour around at the sides to go lower





^this pic is for shammy to make him proud

Can maybe go a little tighter in some spots but CAS 6 = 23 on boot, tRCD 10 = 23 on boot. Not sure if it is just my chip or the mem will have to test another.

[Shammy]

last pic =

cotton buds = girly man....

dont think tcl can stop at 23, go boot at ~ 98bclk and up it to 100 in OS

[Splave]

^thanks for the tip, going to flash to new bios and try again as well.

do not pick on my buds

[Shammy]

Originally Posted by Splave

^LMAO gemini turbo lol would not recomend took full pot to get mems to -40c then I had to pour around at the sides to go lower

do u gain memory from lower than -40C? just curious about other sets of PSCs.

[Splave]

I tried to stay around -40c at first but would BSOD during waza, went to -55 and a little time at -60c when I got excited during run but completed. Probe was positioned on outside side of mem sink about 1/2 inch in so that is was reading the warmest part, middle was probably more like -60c all the time.